Mercury Corporation NetAuction 2026
Mercury specializes in sheet metal fabrication, assembly and integration and other production services across industries. As they adapt to changing customer needs, they have decided to sell some materials and equipment to make room for new production lines. This auction focuses on surplus items, offering a unique opportunity to acquire equipment.
57 Davis Ave. • Hammondsport, NY 14840
Inspection: Saturday, January 24th: 9AM – 12PM
Tuesday, January 27th: 9AM – 4PM & Wednesday, January 28th: 9AM – 4PM
(It is strongly recommended all bidders do a personal inspection before placing any bids.)
Loading: January 29th & 30th: 9AM – 4PM
January 31st: 9AM – 12PM (Noon)
February 2nd & 3rd: 9AM – 4PM
Auction 1 – Trucks, Van Trailers, Truck Tires
Opens: January 21st at 6:00pm
Closing: January 28th at 6:00pm
| Lot Number | Description |
| 1 | 1998 White Volvo WCA Arei Series Dump Truck. 32,000GVWR, VIN:4V1VBAMD9KN625183. 10.0 L Diesel, Fuller manual transmission, Bed cover, Ny State Inspected, 565,223 miles. Runs and drives. T1. |
| 1A | 2015 HINO 268 Box Truck. 25,950GVWR. VIN:5PVNJ8JV0F4S58614. 26FT X 13FT box, Auto transmission, 7.6L Diesel, Air brakes, PW. New York State inspected fleet maintained. 417,164 miles. Runs and drives. |
| 2 | 1993 Eager Beaver Trailer. Deck Over, VIN:112DPM278PL041602. 3 Axels, Good tires. Solid deck. |
| 3 | 2002 Great Dane 45ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA90262B018202. T2. |
| 4 | 1997 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9629VS058303 T3. |
| 5 | 1997 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN:1GRAA9625VS058301 T4. |
| 6 | 1994 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9624RB065701. T5. |
| 7 | 1999 Great Dane 45ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9022XB169402. T6. |
| 8 | 1994 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9623RB065706. T7. |
| 9 | 2002 Great Dane 45ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA90242B018201.T8. |
| 10 | 1994 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9628RB065703. T9. |
| 11 | 1994 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA962XRB065704. T10. |
| 12 | 1999 Great Dane 45ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9020XB169401. T11. |
| 13 | 1997 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9626VB018003. T12. |
| 14 | 1999 Great Dane 45ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9024XB169403. T13. |
| 15 | 1997 Great Dane 48ft tandem axle van trailer, with damaged rear swing doors. VIN: 1GRAA9624VB018002. T14. |
| 16 | 1994 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9626RB065702. T15. |
| 17 | 1993 Great Dane 48ft tandem axle van trailer, with rear swing doors. VIN: 1GRAA9625RB065710. T16. |
| 18 | (4) 295/75R22.5 trailer tires and wheels |
| 19 | (4) 295/75R22.5 trailer tires and wheels |
| 20 | (4) mixed trailer tires and wheels |
| 21 | (4) 295/75R22.5 mixed trailer tires and wheels |
| 22 | (4) 295/75R22.5 mixed trailer tires and wheels |
| 23 | Pallet of trailer wheel drums |
| 24 | (4) 295/75R22.5 trailer tires and wheels |
| 25 | Trailer tire and trailer tire and wheel |
| 26 | (4) 295/75R22.5 mixed trailer tires and wheels |
| 27 | (4) mixed trailer tires |
| 28 | (4) mixed trailer tires and wheels |
| 29 | Pallet of mixed wheel drums |
| 30 | (4) 275/55R20 truck tires from a 2011 GMC |
| 31 | (4) 225/75R16 truck tires and wheels |
Auction 2 – Plant Inventory, Machine Tools & Supplies
Opens: January 21st at 6:00pm
Closing: January 28th at 6:00pm
| Lot Number | Description |
| 1 | Buffalo 15 vertical drill press |
| 2 | Manual metal punch on rolling stand |
| 3 | Sever-All metal chop saw |
| 4 | BTM corp. electric punch |
| 5 | General Engineering GBR pneumatic nibbler with pump |
| 6 | BTM H 10U – 150-500 Tog-L-Lo sheet metal joining system with power unit and roller table |
| 7 | BTM P -10-F x 8 pneumatic air toggle punch |
| 8 | Vescor RM19022G heat exchanger, 300 PSI tubes, 350 degree |
| 9 | Lors 175AR rocker arm spot welder |
| 10 | (2) large vertical air tanks |
| 11 | Ferro Five FR series charger |
| 12 | Pallet with charger and overhead hoist |
| 13 | Rolm forming machine, 70 ton hydraulic/pneumatic forming machine |
| 14 | Swivel plate caster with plastic wheels appx. 1700 units – |
| 15 | (4) boxes with with sanding belts |
| 16 | Pallet of adjustable metal feet |
| 17 | (3) pallets of mixed size swivel plate caster wheels |
| 18 | Pallet of plastic post wheels, pallet of hinges and pallet of swivel plate caster wheels |
| 19 | (6) pallets of swivel plate caster wheels, rubber wheels of all different sizes |
| 20 | (5) pallets of swivel plate caster wheels and solid rubber wheels |
| 21 | Rolling aluminum baker scaffolding |
| 22 | Graco air powered pump with manifold |
| 23 | K. O. Lee Co machine grinder |
| 23A | 8FT roller conveyor. |
| 24 | Planer and table saw unit |
| 25 | Bernard 2300 rotating tele-boom |
| 25B | Tennant ATLV 4300 Ride on Litter Vac. 3 cylinder, Kubota diesel. Low hours. Worked when taken out of service. Will need new battery. |
| 26 | (30) Bernard 2300 rotating tele-boom |
| 27 | Large quantity of mixed size metal part bins |
| 28 | Metal shelving and metal bins |
| 29 | CM overhead electric hoist, 1 ton 1/2 HP – 110v |
| 30 | (2) Turbo material conveyors |
| 31 | Milwaukee Model H milling machine with rolling table |
| 32 | (2) pallet of mixed size cable spools |
| 33 | Tweco smoke collector system |
| 34 | Pallet of electric tape |
| 35 | (2) Nederman extraction suction machine with flexible hose |
| 36 | (2) Nederman extraction suction machine with flexible hose |
| 37 | (4) Nederman extraction suction machine with flexible hose |
| 38 | BTM metal working machine |
| 39 | Several paint spraying buckets and guns |
| 40 | Scroll saw and jointer. |
| 41 | Delta shaper with power feed. |
| 42 | Metal chop saw and Black and Decker radial arm saw. |
| 43 | C&M 2 ton overhead chain hoist |
| 44 | Auto-Sert X-7 insertion press |
| 45 | BTM Tog-L-Loc sheet metal joining machine |
| 46 | BTM Tol-L-Loc P-20-F 3 inch press |
| 47 | Robinson rocker arm spot welder and Lors rocker arm spot welder |
| 48 | Lors Tecna 8207A precision spot welder |
| 49 | Alphil ARG spot welder |
| 50 | Lors precision spot welder |
| 51 | Lors 150AP spot welder, 440V, 100 amp, 6.5 V per min |
| 52 | Taylor-Winfield ENC 18-75 spot welder |
| 53 | Metal cabinet, rolling table and belts |
| 54 | Perfecto 480V switch |
| 55 | Industrial blower |
| 56 | Fanuc System R-30/A |
| 57 | BTM press P10-F, (2) DoAll DBW-15 |
| 59 | BTM Tog-L-Loc B-20H 4.5 stroke sheet metal joining machine |
| 60 | Touch-O-Matic 500-2-03 rocker arm spot welder |
| 61 | Greenerd arbor press No. 3.5 and small arbor press |
| 62 | (3) 2,000 lbs electric lift |
| 63 | (2) antique vertical drill presses |
| 63A | 2,000 lbs electric lift |
| 63B | 2,000 lbs electric lift |
| 63C | 2,000 lbs electric lift |
| 63D | 2,000 lbs electric lift |
| 63E | 2,000 lbs electric lift |
| 63F | 2,000 lbs electric lift |
| 63G | 2,000 lbs electric lift |
| 64 | (4) mixed sized antique drill presses |
| 65 | (5) mixed sized antique vertical drill presses |
| 66 | Farnham 5-41-8 roll forming machine, 12ft |
| 67 | Alphil ARNKN spot welder, 460V, 425 amps 18 inch throat |
| 68 | Alphil ARNKN spot welder, 460V, 425 amps 18 inch throat |
| 69 | Alphil ARNKN spot welder, 460V, 425 amps 18 inch throat |
| 70 | Blue M 606a-FHPX batch oven, 45×26 trays |
| 71 | Measurement granite slab 116x67x16 solid. |
| 72 | BTM Tol-L-Loc sheet metal joining system with electric motor and pump |
| 80 | Pallet of small blower fans |
| 81 | Pallets of sliding electronic drawers, components and small cooling fans |
| 82 | Several pallets of small electronic components |
| 83 | Several pallets of small electronic components – including cords, drawers and more |
| 90 | (6) pallets of Frye wrap EZ 1.5 24 inch x 25ft insulated duct wrap |
| 91 | (6) pallets of Frye wrap EZ 1.5 24 inch x 25ft insulated duct wrap |
| 92 | (5) pallets of Frye wrap EZ 1.5 24 inch x 25ft insulated duct wrap |
| 93 | (3) pallets of differently sized foam insulation boards |
| 94 | (3) piles of mixed sized foam insulation boards |
| 95 | (4) boxes of 10ft x 4ft x 1in sound insulation boards each with 6 pieces |
| 96 | (4) pallets on the bottom of pallet racking containing mixed sized bulk plastic bags |
| 97 | (4) pallets on the middle of pallet racking containing mixed sized bulk plastic bags |
| 98 | (4) pallets on the top of pallet racking containing mixed sized bulk plastic bags |
| 100 | (3) pallets of rubber gaskets |
| 101 | (2) small crates of metal rods |
| 103 | (2) pallet of rubber gaskets |
| 104 | Drawer slides and small pieces of plastic |
| 105 | pallet of mixed electrical components |
| 106 | (2) pallets of adjustable feet |
| 107 | Long weather stripping |
| 108 | (3) pallets of mixed sized plastic bags |
| 109 | (3) pallets of mixed sized plastic bags |
| 110 | Plastic plates and mixed sized plastic bags |
| 111 | Pallet of mixed size threaded metal rods |
| 112 | Pallet of plastic bags |
| 113 | (3) Pallet of obsolete electronic components |
| 114 | (2) pallets of plastic bags |
| 115 | Infratel dual sided, electronic component cabinet with powered ventilation 80 x 44 x 66 |
| 116 | Infratel dual sided, electronic component cabinet with powered ventilation 80 x 44 x 66 |
| 117 | Infratel dual sided, electronic component cabinet with powered ventilation 80 x 44 x 66 |
| 118 | Pallet of electrical conduit and pallet of rubber rollers |
| 119 | Ventilated flammable cabinet, dual sided, 50x42x82 |
| 120 | (2) ventilated electrical component cabinet – 42x18x46 |
| 121 | (2) ventilated electrical component cabinet – 42x18x46 |
| 122 | (3) ventilated electrical component cabinet – 42x18x46 |
| 123 | (2) pallets of mixed sized plastic bags |
| 124 | Pallet of plastic parts |
| 125 | Crate of electric grinders |
| 126 | DoAll Metal Master vertical band saw |
| 127 | Maserati milling machine |
| 128 | Trennjaeger VC320 HA metal saw |
| 129 | Electric warehouse cart needs batterys not working. |
| 130 | (2) Gray WL-20 rolling pneumatic wheel jacks |
| 131 | Mixed sized plastic bags and gaskets |
| 132 | Manual chain falls |
| 133 | Small metal lathe and cabinets with tooling |
| 134 | Morey milling machine |
| 135 | Bliss manual press |
| 136 | Crate of 7/8 inch open end wrenches |
| 137 | Threaded rods and metal rolls |
| 140 | GNB SCR 100 charger, single phase |
| 141 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 142 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 143 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 144 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 145 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 146 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 147 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 148 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 149 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 150 | Warner and Swasey M1200 metal lathe, manual feeder |
| 151 | Delta sander with vertical belt sander |
| 152 | Mercury 8010 hydraulic shear, 12 ft die space, 3 stroke |
| 155 | Stainless steel commercial cooler 20×80 |
| 155A | Stainless steel 3 compartment basin |
| 155B | Stainless steel 3 heated basin |
| 156 | Stainless cooler basin 22×14 |
| 156A | Stainless cooler basin 22×14 |
| 156B | Pallet of cooling units |
| 157 | (3) Stainless serving hood, 34×46 |
| 157A | (4) Stainless serving hood, 60×15 |
| 157B | (5) stainless serving hood 62×24 |
| 157C | Stainless commercial kitchen hood, 77 inches long |
| 158 | Stainless cooling basin, 55×22 |
| 158A | Stainless cooling basin, on cart 14×22 |
| 158B | Stainless cooling basin, on cart 41×22 |
| 159 | Stainless cooling basin, on cart 41×22 with 3 compartments |
| 159A | Stainless cooling basin, on cart 55×22 |
| 160 | Stainless serving station with lighted hood on wheels, 68 x 22 |
| 160A | Stainless serving station with lighted hood on wheels,53 x 22 with 4 compartments |
| 161 | Stainless rolling work station with cooling basin 20×26 |
| 161A | Stainless cooling basin, 55×22 |
| 161B | Stainless cooling basin, 68×20 on wheels |
| 162 | Stainless cooling basin, 68×20 on wheels |
| 162A | Stainless cooling basin, 53×20 on wheels with 4 compartments |
| 162B | Stainless cooling basin, 53×20 on wheels |
| 163 | Box of air hose. |
| 165 | Ingersoll Rand SSR Cooled Rotary Screw Air Compressor, Model SSR-EP100. Capacity 446 CFM, rated operating pressure 125 PSIG, maximum discharge pressure 128 PSIG, maximum modulate pressure 135 PSIG. Driven by a 100 hp, 3/60/230/460 volt |
| 166 | Ingersoll Rand SSR Cooled Rotary Screw Air Compressor, Model SSR-EP100. Capacity 446 CFM, rated operating pressure 125 PSIG, maximum discharge pressure 128 PSIG, maximum modulate pressure 135 PSIG. Driven by a 100 hp, 3/60/230/460 volt |
| 175 | Miller Millematic 350P welder |
| 176 | Miller Millematic 350P welder with 2 wire feeders |
| 177 | Hobart Cyber-Wave 300S water cooled, welder |
| 178 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 179 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 180 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 181 | Miller Deltaweld 452 welder with Miller 22A 24V wire feeder, three phase |
| 182 | Miller Deltaweld 452 welding power source |
| 183 | Miller Deltaweld 452 welding power source |
| 184 | Miller Deltaweld 452 welding power source |
| 185 | Miller Deltaweld 452 welding power source |
| 186 | Miller Deltaweld 452 welding power source |
| 187 | Miller Deltaweld 452 welding power source |
| 188 | Miller Deltaweld 452 welding power source |
| 189 | Miller Millematic 350P welder |
| 191 | Crate of wall mounted industrial fans |
| 192 | Crate of wall mounted industrial fans |
| 193 | Crate of wall mounted industrial fans |
| 194 | Crate of wall mounted industrial fans |
| 195 | Pallet of mixed filters and parts |
| 200 | Linde VI-252CV welder |
| 201 | Linde UCC-305 ARC/TIG welder – parts only |
| 202 | Linde VI-252CV welder and Linde L-tec 450A – parts only. |
| 203 | Linde VI-252 welding power supply and second Linde welder |
| 204 | Linde L-Tec VI-450A welder and Linde VI-252 welding power source with wire feeder |
| 205 | Linde 252 welder with wire feeder and ESAB coolant circulator |
| 206 | (2) Linde VI-252 welders and (2) Linde water coolers – parts only |
| 207 | (3) Linde VI-450A welders |
| 207A | (3) Linde VI-450A welders with 2 accessory units |
| 208 | (2) Linde VI-450A welders with wire feeders and 2 additional wire feeders |
| 209 | Linde VI-252 power supply with wire feeder – parts only |
| 210 | Linde VI-252 power supply with wire feeder with wire feeder and 2nd Linde VI-252 welder |
| 211 | (2) Linde VI-450A welders with wire feeders |
| 212 | (2) Linde VI-450A welders with wire feeders – parts only |
| 213 | (2)Linde VI-252 power supply with wire feeder |
| 214 | Linde VI-200 power supply and (2) Linde VI-252 welders |
| 215 | (2) Linde VI-252 welders one with a wire feeder – parts only |
| 216 | (2) Linde UCC 305 parts units (2) linde VI-252 parts units and 2 wire feeders |
| 217 | (3) Linde VI-252 parts units, Linde UCC305 parts unit and 1 wire feeder |
| 218 | (2) Linde VI-252 welders with wire feeders- parts only, ESAB heliarc 252 welder and cooler |
| 220 | (4) pallets of mixed electrical parts |
| 221 | Crate of wall mounted industrial fans |
| 222 | General Engineering GBR pneumatic nibbler with manual nibbler |
| 223 | G&E 20 inch metal machine |
| 224 | (2) pallets of hinges and 2 pallets of plastic pipe fittings and brass fittings |
| 225 | Crate of threaded aluminum pipe connections |
| 226 | 2,000 lbs lift |
| 227 | Black Brothers roll former, 50 inch |
| 228 | Tables and cabinets with mixed hand tools and parts |
| 229 | (2) Budgit 2 ton electric overhead hoists with trolly’s |
| 229A | Torit industrial furnace |
| 230 | Universal small portable heater |
| 231 | Trane S unit heater and Marathon unit heater |
| 232 | Beacon 100,000 BTU unit heater and fan coil unit |
| 233 | Beacon 125,000 BTU unit heater and furnace |
| 234 | Trane unit heater and 2 100,000 unit heaters |
| 235 | Beacon 400,000 unit heater and Beacon 100,000 BTU unit heater |
| 236 | (2) Beacon 400,000 unit heaters |
| 237 | Beacon 400,000 unit heaters |
| 238 | Linde VI-252 power supply with wire feeder – parts only |
| 239 | Commander MultiDrill 3-22 CNC multi head drill – with tooling with Dynapath System 10 controls |
| 240 | Giddings & Lewis Cordax 1808 DCC MEA measurement tool |
| 241 | Antique vertical drill press |
| 242 | Chicago 131 metal press 4ft |
| 243 | Moak metal table saw with rolling adjustable table |
| 244 | Onsrud W240 router |
| 245 | Addressograph Class 1800 plate stamper |
| 246 | Dengensha feeder |
| 247 | (2) pedestal grinders |
| 248 | Metal pipe fittings and threaded pipe |
| 250 | Crate of garbage can lids |
| 251 | Crate of wall mounted industrial fans |
| 252 | Sand blast barrel |
| 253 | (3) pallets of mixed size staples |
| 254 | Pallet of double loop chain |
| 255 | (3) bench grinders |
| 256 | Vertical sander |
| 257 | DoAll16-2 metal bandsaw. |
| 258 | DeWalt radial arm saw |
| 259 | (3) small sander/grinder |
| 260 | Marsh stencil machine |
| 261 | Atlas small metal lathe |
| 262 | Gothenburg long belt sander 7ft |
| 263 | Vernon drill press and General plastic press |
| 264 | (2) Piles of floor fans |
| 265 | CM Meteor overhead heavy duty hoist on trolly and 2 small CM overhead hoists |
| 266 | Coffing 1 ton overhead chain hoist on motorized trolly and CM 1/2 ton hoist and small hoists |
| 267 | Crate of mixed sized overhead electric hoists |
| 268 | Large amount of pipe insulation sleeves and insulation blocks |
| 269 | Hydraulic pump with 25HP electric motor and hydraulic pump with small electric motor |
| 270 | Hobart MR-300 electric welder |
| 271 | CM 2-ton overhead chain hoist with trolly |
| 272 | Coffing 1 ton overhead chain hoist on motorized trolly |
| 273 | Large pallet of plastic edges 8ft |
| 274 | South bend small lathe and pedestal grinder and hand tools |
| 275 | Heavy duty pallet forks 48 long x 6 wide |
| 276 | (4) flip over fork tines |
| 277 | INGEERSOLL-RAND HYDROGARD. Air water separator. |
| 278 | 2 – 2 TON Budgit overhead chain hoist with trolly. |
| 279 | 2 – 88.1 GAL steel tanks. |
| 279A | Steel banding cart. with tools. |
| 280 | Electo-Matic Demagnetizer Machine. |
| 281 | Covel No.22 Universal Cutter and Tool Grinder. |
| 282 | Industrial drill press on Heavy duty Steel bench. |
| 283 | Air distributor with fittings on stand. |
| 284 | Pallet of bricks and a steel tank dolly. |
| 285 | Heavy duty steel workbench with contents. |
| 286 | Dillon DYNANOMETER. On steel stand. |
| 287 | Pallet of 10x wood tables. new. |
| 288 | Steel lockers. |
| 300 | (5) Man platforms, 8 inches |
| 301 | (11) Man platforms, 8 inches |
| 302 | (8) Man platforms, 8 inches |
| 303 | (6) Man platforms, 8 inches |
| 304 | (6) Man platforms, 8 inches |
| 305 | Crate of scrap angle iron |
| 306 | Angle iron platform, 27in x 48in x 9.5 in – QTY 22 |
| 307 | Crate of scrap angle iron |
| 308 | Crate of scrap angle iron |
| 309 | Crate of scrap angle iron |
| 310 | Crate of scrap angle iron |
| 311 | (9) Man platforms, 8 inches |
| 312 | Angle iron platform, 27in x 48in x 9.5 in – QTY 12 |
| 313 | Angle iron platform, 27in x 48in x 9.5 in – QTY 10 |
| 314 | Angle iron platform, 27in x 48in x 9.5 in – QTY 11 |
| 315 | Angle iron platform, 27in x 48in x 9.5 in – QTY 11 |
| 316 | Angle iron platforms |
| 317 | Angle iron platform, 27in x 48in x 9.5 in – QTY 18 |
| 318 | Angle iron platform, 27in x 48in x 9.5 in – QTY 18 |
| 319 | Angle iron platform, 27in x 48in x 9.5 in – QTY 28 |
| 320 | Angle iron platform, 27in x 48in x 9.5 in – QTY 16 |
| 321 | Angle iron platform, 27in x 48in x 9.5 in – QTY 18 |
| 322 | Angle iron platform, 27in x 48in x 9.5 in – QTY 21 |
| 323 | Angle iron platform, 27in x 48in x 9.5 in – QTY 63 |
| 324 | Angle iron platform, 27in x 48in x 9.5 in – QTY 140 |
| 325 | Angle iron platform, 27in x 48in x 9.5 in – QTY 165 |
Auction 3 – Bulk Steel Inventory (Hot & Cold Roll, Galvanized, Aluminum)
Opens: January 21st at 6:00pm
Closing: January 29th at 6:00pm
| Lot Number | Description |
| 500 | 1 stack, approximately 8 sheets, galvanized .033, .069 CRS, .044 galvanized, 48×120 |
| 501 | 1 stack, approximately 7 sheets total, 48×120, .055, .044 electro galvanized |
| 502 | 1 stack, 48×120, .075, stainless, approximately 7 sheets |
| 503 | 1 stack of 48×120 .023 stainless, approximately 23 sheets |
| 504 | 1 sheet of .062 copper, 3×8 with miscellaneous pieces of copper. |
| 505 | 3 sheets of copper 4x10x5/16 and 4x8x5/16 |
| 506 | 1 sheet of copper 36x96x3/16 |
| 507 | Copper 1/8in copper, 5 sheets |
| 508 | 4 sheets of stainless one is 48×108, 3 are 48×120, 1/8 |
| 509 | Approximately 360 pieces,1/8in, 8×36 steel sheets |
| 510 | Approximately 120 pieces, 26×60, 14 gauge, 4000lbs |
| 511 | Approximately 120 pieces, 26×60, 14 gauge, 4000lbs |
| 512 | Approximately 120 pieces, 26×60, 14 gauge, 4000lbs |
| 513 | 2 rolls of 9.5in aluminum, 24 gauge, 12in. |
| 514 | Pallet of copper bus bars and coil |
| 515 | Pallet of stainless, 48×96, .048, approximately 22 sheets |
| 516 | Pallet of hinges, 72in stainless, 2.5in open approximately 100 pieces, 72in 1in open approximately 8 pieces |
| 516A | Pallet of 6ft tool steel. |
| 517 | Pallet of 3×3 angle approximately 62in, 26 pieces. |
| 518 | Pallet of 3×3 angle approximately 62in, 40 pieces |
| 519 | Pallet of square tubing |
| 520 | Approximately 6 sheets, .060 stainless 4×8 and .29 stainless 4×5 |
| 521 | Pallet of tube and angle- Iron. |
| 522 | Pallet of short angle. |
| 523 | 480 pieces of 8×36 1/8in, approximately 4500lb |
| 524 | 4ft 8.5in posts, 9 pieces |
| 525 | Pallet of .099 galvanized 24×48 approximately 22 pieces |
| 526 | Pallet of .048 stainless 22×48 approximately 18 pieces |
| 527 | Approximately 60 sheets, .048, stainless, 15.5×48, 18×48 |
| 528 | Approximately 40 sheets, .048, stainless, 22×48 |
| 529 | Approximately 64 sheets, .063, aluminum, 46×36 |
| 530 | Approximately 140 sheets, .070, galvanized, 18×36 |
| 531 | Approximately 75 sheets, .099, galvanized, 15×48 |
| 532 | 1 sheet of stainless rigidized 48×120, 1+ sheets of .016, 36×120 |
| 533 | 2 sheets of .024 galvalume, 4 sheets of .012 stainless, 36×120 |
| 534 | Approximately 5 sheets of 4×8 and random, 3 sheets of .57 galvanized |
| 535 | 3 sheets – 1 stainless 36×96, 2 random |
| 536 | Approximately 30 sheets, . 069, galvanized, 27×48 Approximately 20 sheets, .069, galvanized, 18×48 |
| 537 | Approximately 15 sheets, .055, galvanized, 48×56 Approximately 30 sheets, .069, galvanized, 57×48 |
| 538 | Approximately 30 sheets, .044, galvanized, 38×48 |
| 539 | Stainless screen 16×21, Approximately 40 sheets, .038, 48×41 |
| 540 | Approximately 48 sheets, .050, 18×48, aluminum Approximately 25 sheets, .055, 36×31, cold roll Approximately 15 sheets, .055, 24×48, cold roll Approximately 15 sheets, .055, 32×48, cold roll |
| 541 | Approximately 3750lbs, .097, 36×48 |
| 542 | Approximately 3725lbs, .071, 26×60, 8×36 |
| 543 | Approximately 480 pieces, 4720lbs, 8×36 |
| 544 | Approximately 230 pieces, stainless strips, 3.5×96, 2.5×96, .048 |
| 545 | Approximately 2200lbs, 65 sheets, 14 gauge, 60×26 |
| 546 | Approximately 140 sheets, .033, galvanized, 33×48 |
| 547 | Approximately 3230lbs, 170 sheets, 20 gauge, 31×82 |
| 548 | Approximately 88 sheets, 3850 lbs, 12 gauge, 48×30 |
| 549 | Approximately 30 sheets, .099, 9×48, cold roll |
| 550 | Approximately 4400lbs, 70 sheets, .097, 42×48 |
| 551 | Approximately 72 pieces, 2900lbs, 12 gauge, 48×27 |
| 552 | Approximately 70 pieces, 14 gauge, 26×61 |
| 553 | Approximately 4 sheets, .071, 48×22 Approximately 117 pieces, .099, 24×48 |
| 554 | Approximately 100 sheets, 10 gauge, 9×48 |
| 555 | Approximately 75 sheets, 10 gauge, 9×48 |
| 556 | Approximately 110 sheets, 3720 lbs, 14 gauge, 26×61 |
| 557 | Approximately 125 sheets, 3320 lbs, 1/4in, 16×22 |
| 558 | Approximately 89 sheets, 3890lbs, .099, 48×30 |
| 559 | Approximately 60 sheets .070 35×48 plus .98 |
| 560 | Approximately 25 sheets, .071, 25×48 Approximately 111 sheets, .071, 25×48 Approximately 40 sheets, .071, 31×48 |
| 561 | Approximately 147 sheets, .033, galvanized, 33×48 |
| 562 | Approximately 96 sheets , .033, 33×48 |
| 563 | Approximately 30 sheets, .044, cold roll, 32×48 Approximately 3 sheets, .033, galvanized, 36×48 Approximately 30 sheets, .033, galvanized, 48×63 |
| 564 | Approximately 144 sheets, .033, cold roll, 24×71 |
| 565 | Approximately 3319 lbs, 147 pieces, stainless, 35×48 |
| 566 | Approximately 30 sheets, .048, stainless, 21×48 |
| 567 | Approximately 60 sheets, .033, galvanized, 48×73 |
| 568 | Approximately 20 sheets, .097 hot roll, 36×66 |
| 569 | Approximately 37 sheets, .070, cold roll, 33×66 |
| 570 | Approximately 65 sheets, .44 cold roll, 31×78 |
| 571 | Approximately 120 sheets, .033, galvanized, 29×73 |
| 572 | Approximately 118 sheets, 4215lbs, .099 hot roll, 24×48 |
| 573 | Approximately 118 sheets, 4215lbs, .099 hot roll, 24×48 |
| 574 | Approximately 118 sheets, 4215lbs, .099 hot roll, 24×48 |
| 575 | Approximately 175 sheets, 2530lbs, .033 galvanized, 27×51 |
| 576 | Approximately 175 sheets, 2530lbs, .033 galvanized, 27×51 |
| 577 | Approximately 61 sheets, 3420 lbs, .097, 38×48 |
| 578 | Approximately 47 sheets, 2640lbs, .097, 39×48 |
| 579 | Approximately 61 sheets, 3424lbs, 12 gauge, 38×48 |
| 580 | Approximately 142 sheets, .044 cold roll, 24×71 |
| 581 | Approximately 175 sheets, 2532 lbs, 20 gauge, 27×51 |
| 582 | Approximately 30 sheets, 14 gauge, 17×48 |
| 583 | Approximately 132 sheets, 3445lbs, 20 gauge, galvanized, 48×52 |
| 584 | Approximately 132 sheets, 3445lbs, 20 gauge, galvanized, 48×52 |
| 585 | Approximately 100 sheets, 20 gauge, galvanized, 48×48 |
| 586 | Approximately 93 sheets, 2454lbs, galvanized, 48×41 Approximately 25 sheets, .071, hot roll, 48×48 |
| 587 | Approximately 100 sheets, .071, hot roll, 48×47 |
| 588 | Approximately 120 sheets, 4061lbs, 14 gauge, 26×60 |
| 589 | Approximately 264 sheets, 3892lbs, galvanized, 20 gauge, 23×60 |
| 590 | Approximately 264 sheets, 3892lbs, galvanized, 20 gauge, 23×60 |
| 591 | Approximately 102 sheets, 1769lbs, hot roll, 10 gauge, 9×48 |
| 592 | Approximately 102 sheets, 1769lbs, hot roll, 10 gauge, 9×48 |
| 593 | Approximately 102 sheets, 1769lbs, hot roll, 10 gauge, 9×48 |
| 594 | Approximately 175 sheets, galvanized, 2532lbs, 20 gauge, 27×51 |
| 595 | Approximately 106 sheets, hot roll, 3600lbs, 10 gauge, 24×48 |
| 596 | Approximately 189 sheets, galvanized, 3319lbs, 20 gauge, 35×48 |
| 597 | Approximately 189 sheets, cold roll, 2548lbs, .033, 24×71 |
| 599 | Approximately 110 sheets, hot roll, 3722lbs, 14 gauge, 26×60 |
| 600 | Approximately 68 sheets, hot roll, 3920lbs, .099, 42×48 |
| 601 | Approximately 68 sheets, hot roll, 3920lbs, .099, 42×48 |
| 601A | (5) 9ft vinyl caps |
| 602 | Stainless, 843lbs, .75, 16×33 |
| 602A | Approximately 220 sheets, galvanized, 3588lbs, 20 gauge, 26×60 |
| 602B | Approximately 220 sheets, galvanized, 3588lbs, 20 gauge, 26×60 |
| 602C | Approximately 220 sheets, galvanized, 3588lbs, 20 gauge, 26×60 |
| 602D | Approximately 168 sheets, galvanized, 2942lbs, 20 gauge, 26×61 |
| 602E | Approximately 46 sheets, hot roll, 1094lbs, .097, 36×66 |
| 603 | Approximately 120 sheets, hot roll, 4215lbs, .097x 24×48 |
| 604 | Approximately 107 sheets, hot roll, 3634lbs, .097 |
| 605 | Approximately 100 sheets, hot roll, 3753lbs, .097 |
| 606 | Stainless 1532lbs, .075, 16×33 plus stainless 1149lbs, .075, 18×32 |
| 607 | Approximately 91 sheets, hot roll, 3/16, 24×28 |
| 608 | Approximately 225 sheets, cold roll, 1/16, 42×24 |
| 609 | Approximately 4 sheets, cold roll, 1/16, 27×71 Approximately 80 sheets, cold roll, 1/16, 24×71 |
| 610 | Approximately 100 sheets, aluminum, .050, 23×78 |
| 611 | Approximately 100 sheets, aluminum, .050, 29×73 |
| 612 | Approximately 400 sheets, 3970lbs, hot roll, 1/8, 8×36 |
| 612A | Approximately 25 sheets, steel plate, 1/2, 16×35 |
| 612B | Box of miscellaneous hinges |
| 613 | Approximately 1 sheet cold roll, 1x5x12ft Approximately 7 sheets cold roll, 2x2x12ft |
| 614 | Approximately 7 sheets cold roll, 2×2.5x12ft Approximately 1 sheet cold roll, 1.5x2x12ft |
| 615 | Approximately 100 sheets, cold roll, 2.5x.25x12ft |
| 616 | Approximately 1 sheet sheet cold roll, 1×5.25×8 Approximately 54 sheets cold roll, 1.5×3/8×12 |
| 617 | Approximately 8 sheets cold roll, 3.5x.5×12 Approximately 8 sheets cold roll, 5x1x12 Approximately 30 sheets cold roll 4.75×5/16×12 Approximately 50 sheets cold roll 5×5/16×12 |
| 618 | Approximately 100 sheets cold roll, .033, 36×68 Approximately 8 sheets cold roll, .033, 64×48 Approximately 140 sheets cold roll, .033, 34×68 |
| 619 | Approximately 125 sheets, 4000lbs, cold roll, .033, 43×72 |
| 620 | Approximately 80 sheets, galvanized, .033, 48×65 |
| 621 | Approximately 153 sheets, 6000lbs, aluminized steel, .046, 48×60 |
| 651 | Approximately 1 sheet, 1/16, galvanized, 4×10 |
| 652 | Approximately 40 sheets, hot roll, .075, 25×48 Approximately 80 sheets, hot roll, .99, 36×48 |
| 653 | Approximately 45 sheets, galvanized, .071, 48×64 Approximately 25 sheets, hot roll, .75, 42×60 Approximately 3 sheets, hot roll, .40, 47×65 |
| 654 | Approximately 19, bar stack, 8inx3/8×20 Approximately 16, bar stock, 5x1ftx20ft |
| 655 | Approximately 7, bar stock, 3.25×5/16x20ft Approximately 8, bar stock, 4.5×5/16x20ft Approximately 4, bar stock, 2.5×3/8x20ft Approximately 16, bar stock, 3/4x4x20ft |
| 656 | Approximately 600 sheets, hot roll, .099, 9.25×48 |
| 657 | Approximately 80 sheets, cold roll, 1/16, 38×67 Approximately 60 sheets, galvanized, .70, 43×63 |
| 658 | Approximately 60 sheets, cold roll, .033, 31×82 |
| 659 | Approximately 50 sheets, cold roll, .033, 36×68 |
| 660 | Approximately 220 sheets, galvanized, .033, 43×65 |
| 661 | Approximately 125 sheets, perforated aluminum, .050, 67×16 |
| 662 | Approximately 130 sheets, perforated aluminum, .050, 73×29 |
| 664 | Approximately 50 sheets of screen, 3×10, 4×10, .033, .055 |
| 665 | Approximately 75 sheets, .033, perforated galvanized, 38×84 |
| 666 | Approximately 4 sheets of unknown, 4×10 |
| 667 | Approximately 250 sheets, galvanized, .70, 36×20 Approximately 40 sheets, stainless, 1/16, 25×36 |
| 668 | Approximately 111 sheets, cold roll,, .055, 29×48 Approximately 61 sheets, hot roll, .075, 20×68 |
| 669 | Approximately 225 sheets, hot roll, .075, 26×24 Approximately 20 sheets, aluminum, .063, 27×36 |
| 670 | Miscellaneous lots of bar and round stock |
| 671 | Approximately 88 sheets, hot roll, .097, 36×48 |
| 672 | Approximately 132 sheets, hot roll, .097, 36×48 |
| 673 | Approximately 200 sheets, galvanized, .044, 19×48 Approximately 90 sheets, hot roll, 3/16, 36×48 |
| 674 | Approximately 360 sheets, hot roll, 1/4, 16×22 |
| 675 | Approximately 180 sheets, hot roll, 1/4, 16×22 |
| 676 | Approximately 720 sheets, hot roll, 1/4, 16×22 |
| 677 | Approximately 540 sheets, hot roll, 1/4, 16×22 |
| 678 | Approximately 12 sheets, galvanized, .033, 36×48 Approximately 69 sheets, galvanized, .033, 36×60 Approximately 25 sheets, galvanized, .099, 39×63 Approximately 150 sheets, galvanized, .033, 26×60 |
| 679 | Approximately 200 sheets, 5500lbs, galvanized, .070, 30×30 |
| 680 | Approximately 180 sheets, hot roll, 1/4, 16×22 |
| 681 | Lot of hinges, 21in, quantity 600 3/8x1in stainless quantity 8 .040 stainless, random Approximately 8 sheets, .020, stainless, 16×48 Approximately 2 sheets, aluminum, 48×48 Approximately 95 sheets, galvanized, .033, 48×76 |
| 682 | Approximately 298 sheets, hot roll, 1/8, 3000lbs, 8×36 |
| 683 | Approximately 278 sheets, hot roll, 1/8, 2730lbs, 8×36 |
| 684 | Approximately 2 sheets, hot roll, .156, 36×48 Approximately 20 sheets, cold roll, 1/16, 48×46 Approximately 30 sheets, aluminum, .040, 48×41 |
| 685 | Approximately 50 sheets, stainless, .048, 16×33 Approximately 100 sheets, aluminum, .055, 28×28 |
| 686 | Approximately 256 sheets, stainless, .060, 23×45 |
| 687 | Approximately 250 sheets, 6576lbs, galvanized, .113, 18×48 Approximately 538 sheets, 7784lbs, cold roll, .120, 5×77 |
| 688 | Approximately 300 sheets, 9000lbs, galvanized, .113, 18×48 |
| 689 | Approximately 72 sheets, 1500lbs, hot roll, .099, 9×48 Approximately 66 sheets, 1516lbs, hot roll, .099, 15×48 Approximately 80 sheets, galvanized, 1/8, 23×48 |
| 690 | Approximately 28 sheets, hot roll, 3/8, 8×48 Approximately 12 sheets, hot roll, .099, 38×35 Approximately 65 sheets, galvanized, .070, 25×39 Approximately 80 sheets, galvanized, 1/16, 32×36 |
| 691 | Mixed lot of stainless and aluminum, approximately 400lbs |
| 692 | Approximately 500 sheets, hot roll, 1/8, 4900lbs, 8×36 |
| 693 | Approximately 72 sheets, cold roll, 1/8, 4500lbs, 37×48 |
| 694 | Approximately 20 sheets, stainless woven wire, 22×31 Approximately 100 sheets, stainless, .036, 42×16 Approximately 100 sheets, nickel steel, 33×48 |
| 695 | Approximately 15 sheets, cold roll, 1/8, 17×60 Approximately 134 sheets, galvanized, .038, 26×60 |
| 696 | Approximately 106 sheets, 3976lbs, cold roll, 1/8, 18×60 |
| 697 | Approximately 240 sheets, 11,500lbs, hot roll, .176, 14×65 |
| 698 | Approximately 374 sheets, 20,000lbs, hot roll, 1/4, 12×65 |
| 699 | Approximately 444 sheets, 14,800lbs, cold roll, 1/8, 15×64 |
| 700 | Approximately 225 sheets, perforated aluminum, .063, 18×77 |
| 701 | Approximately 80 sheets, 5000lbs, .069, 48×67 |
| 702 | Approximately 25 sheets, hot roll, 14 gauge, 48×96 Approximately 50 sheets, hot roll, .099, 45×96 Approximately 10,000lbs total |
| 703 | Approximately 70 sheets, cold roll, 1/16, 27×109 |
| 704 | Approximately 25 sheets, cold roll, .099, 29×105 Approximately 25 sheets, cold roll, .099, 22×105 |
| 705 | Approximately 100 sheets, 11,000lbs, hot roll, .071, 45×120 Approximately 40 sheets, hot roll, .071, 36×120 |
| 706 | Approximately 8 sheets, aluminum, rigidized, .040, 16×96 Approximately 50 sheets, cold roll, .075, 22×96 |
| 707 | Approximately 20 sheets, stainless, .048, 48×120 Approximately 1 sheet, .048, 48×120 Approximately 14 sheets, hot roll, .097, 48×120 |
| 708 | Approximately 6 sheets, stainless, .022, 36×120 Approximately 1 partial sheet, stainless, bar, 90in Approximately 1 sheet, stainless, .090, 48×120 Approximately 30 sheets, cold roll, .055, 48×120 |
| 709 | Approximately 5 sheets, hot roll, .171, 48×120 Approximately 6 sheets, cold roll, .055, 48×120 Approximately 2 sheets, aluminum, 1/8, 48×144 |
| 710 | Approximately 1 sheet, aluminum, 1/8, 48×48 Approximately 1 sheet, stainless, .120, 48×120 Approximately 2 sheets, stainless, .120, 48×96 Approximately 30 sheets, aluminized steel, .034, 48×120 Approximately 60 sheets, hot roll, .048, 48×120 |
| 711 | Approximately 3 sheets, stainless, .035, 48×120 Approximately 3 sheets, stainless, .048, 60×96 Approximately 2 sheets, cold roll, 14 gauge, 60×120 Approximately 10 sheets, stainless, .045, 60×144 |
| 712 | Approximately 5 sheets, cold roll, .044, 48×120 Approximately 4 sheets, stainless, .071, 48×114 Approximately 1 sheet, aluminum, 1/8, 48×120 |
| 713 | Approximately 35 sheets, cold roll, .055, 36×96 Approximately 1 sheet, stainless, .175, 48×89 Approximately 5 sheets, cold roll, .044, 6×48 Approximately 1 sheet, cold roll, galvanized, 48×120 Approximately 6 sheets, aluminum, .063, 48×144 |
| 714 | Approximately 10 sheets, steel, .021, 48×120 Approximately 1 sheet, galvanized, .290, 48×120 Approximately 12 sheets, cold roll, .055, 48×120 |
| 715 | Approximately 40 sheets, stainless, .048, 36×120 Approximately 5 sheets, stainless, .042, 36×120 |
| 716 | Approximately 5 sheets, cold roll, .033, 36×120 Approximately 20 sheets, aluminum, .050, 36×96 Approximately 2 sheets, aluminum, .090, 36×120 Approximately 12 sheets, aluminized steel, .034, 36×120 Approximately 10 sheets, aluminum, .040, 36×120 Approximately 40 sheets, aluminum, 1/8, 48×144 |
| 717 | Approximately 1 sheet, aluminized steel, .046, 48×83 Approximately 75 sheets, galvanized, .055, 48×120 |
| 718 | Approximately 30 sheets, aluminized steel, .055, 36×12 Approximately 5 sheets, galvanized, .033, 36×135 Approximately 7 sheets, stainless, .025, 25×120 Approximately 6 sheets, galvanized, .033, 36×120 Approximately 291 sheets, galvanized, .038, 36×120 |
| 719 | Solid rubber, 8in thick, 4×8 |
| 720 | (3) Solid rubber, 8in thick, 4×8 |
| 721 | Approximately 37 sheets, galvanized, .113, 48×120 Approximately 420 sheets, galvanized, .027, 48×120 |
| 722 | Approximately 2 sheets, galvanized, .032, 48×120 Approximately 8 sheets, galvanized, .048, 48×120 |
| 723 | Approximately 8 sheets, hot roll, .099, 48×96 Approximately 1 sheet, aluminum, .046, 48×96 Approximately 2 sheets, cold roll, .027, 48×120 |
| 724 | Approximately 83 sheets, stainless, .048, 36×96 Approximately 15 sheets, stainles, .071, 36×140 |
| 725 | Approximately 20 sheets, stainless, .048, 36×96 Approximately 1 sheet, stainless, .022, 36×96 Approximately 2 sheets, stainless, .075, 36×120 Approximately 6 sheets, stainless, .048, 36×120 |
| 726 | Approximately 32 sheets, stainless, .048, 36×120 Approximately 60 sheets, stainless, .048, 36×110 Approximately 66 sheets, 3760lbs, stainless, .048, 36×120 |
| 727 | Approximately 32 sheets, stainless, .048, 48×120 Approximately 32 sheets, stainless, .048, 48×120 Approximately 77 sheets, 6855lbs, stainless, .048, 48×120 Approximately 63 sheets, 6018lbs, stainless, .048, 48×120 |
| 728 | Approximately 10 sheets, .070, 30×48 |
| 729 | Large lot of hinges, most at 6ft long, approximately 100 pieces |
| 730 | 1/4x16x48 steel sections used for fire pits, approximately 56 pieces |
| 731 | 1/4x16x48 steel sections used for fire pits, approximately 70 pieces |
| 732 | Approximately 300 sheets, .044, cold roll, 12×77 Approximately 50 sheets, .033, cold roll, 36×68 |
| 732A | Wire. 7 Strain alloy wire approximately 50FT. |
| 733 | Miscellaneous steel strips |
| 734 | Miscellaneous basket of tube stock |
| 735 | steel Pallet with miscellaneous angle iron, pieces up to approximately 20ft long |
| 736 | Miscellaneous pallet of bar and tube stock |
| 737 | Miscellaneous pallet of round and square tube |
| 738 | Approximately 50 sheets, .038, cold roll, 30×83 |
57 Davis Ave.
Hammondsport, NY 14840
Inspection:
Saturday, January 24th: 9AM – 12PM
Tuesday, January 27th: 9AM – 4PM
& Wednesday, January 28th: 9AM – 4PM
(It is strongly recommended all bidders do a personal inspection before placing any bids.)
Loading:
January 29th & 30th: 9AM – 4PM
January 31st: 9AM – 12PM (Noon)
February 2nd & 3rd: 9AM – 4PM
RTI is loading until Tuesday, February 3rd, between 9AM – 4PM, no appointment needed.
After 2/3, appointments are required and much contact Jerry at 607-769-7504
All items must be removed within 30 days of the Auction Close.
ONSITE PAYMENTS
Thursday 9am-4pm
Friday 9am-4pm
Saturday 9am-12pm
Monday 9am – 4pm
Don’t miss this fantastic opportunity to access surplus equipment and be part of Mercury Manufacturing’s ongoing legacy!
